Performing Netgear extender setup is an excellent choice if you want to access a super-fast internet connection on all your devices. After doing the Netgear Nighthawk extender setup, your existing WiFi network will get extended and transmitted in every nook and cranny of your home. Despite these amazing benefits, at times, users encounter issues with their extenders. And one of those issues is the red light issue.
This issue usually occurs because of an inadequate power supply, weak Ethernet connection, technical glitches, outdated firmware, and WiFi interference. But, the good thing is that it can be fixed. That is possible if you walk through the hacks mentioned in this post. Trust us; the information given below won’t disappoint you. Thus, get down to reading this instant.
[Resolved] Netgear Extender Red Light Issue
- Update the Firmware
As mentioned above, outdated firmware is one of the contributing factors behind the Netgear extender red light issue. So, what you need to do here is pretty simple, i.e. update the firmware of your device by accessing the Nighthawk login page:
- Create a connection between your devices.
- As soon as that is done, open an internet browser on your system.
- Make sure that the internet browser is not outdated or filled with the cache.
- Take your attention to the web address field.
- Input the extender’s default web address.
- Click the Enter button.
- On the login portal, insert the default admin details.
- Hitting the login button will take you to the main dashboard.
- Go to Administration.
Now, click on the Extender Update button to complete the firmware update process by accessing the Netgear Nighthawk login page.
- Restart the Extender
If the above-mentioned hack did not work in your favor, it is recommended that you restart your Netgear Nighthawk extender. Worry not; restarting your device is a piece of cake. However, in case, you still help to go about the process, then here are the steps that you should walk through:
- Switch off your extender.
- Wait for as long as required.
- Turn on your extender.
See? It was that simple. If this hack wasn’t useful either, keep reading this post.
- Check the Power Supply
While performing extender setup, did you not check the main socket into which you were plugging your device? Perhaps, it is damaged due to which your device is not getting a fluctuation-free power supply and forcing the LED to blink red.
Therefore, take our advice, and plug your extender into a different wall outlet. Just make sure that the new one has no damage.
- Get a Brand New Cable
Maybe, the Ethernet cable in use is not free of damage. In other words, it either has deep cuts on it or it’s worn out. Whatever the case might be, we suggest that you tape up your existing cable.
What happened? Want an alternative? Well, step out of your house as well as your comfort zone and buy a new Ethernet cable.
- Eliminate WiFi Interference
Have you ever noticed how your mobile network starts acting out every time you go into a room surrounded by smart home appliances? Wondering what smart home appliances are? Well, you’ll understand them by the following examples:
- Cordless phones
- Bluetooth speakers
- Treadmills
- Televisions
- Refrigerators
- Microwave ovens
- Washing machines
- Baby monitors
These appliances emit electromagnetic waves that block the signals which your extender is trying to transmit. This can impact its productivity and cause issues like the Netgear extender red light issue.
- Reset the Extender
In case none of the above-mentioned troubleshooting hacks assisted you in resolving the Netgear extender red light issue, then you ought to reset your device.
That can be done if you take the help of the following steps:
- Look at all corners of your extender.
- When you find the teeny-tiny Reset button, press it.
- Wait for some time.
Now that you have restored your extender to the default mode, it’s time to set it up from scratch. Refer to the user manual for the setup instructions.
For your information, if you ever face issues with your router in the future and are forced to do Nighthawk router setup, the user manual will again come in handy.
Final Thoughts
The Netgear extender red light issue has successfully managed to ruin the internet experience of users all across the globe. We really hope that the aforementioned hacks helped you to troubleshoot the issue at hand.